AiP74LV1T08

AiP74LV1T02 は、単一のレベル変換 2 入力 NOR ゲートです。低しきい値入力は、VCC = 3.3V で 1.8V 入力ロジックをサポートし、1.8V から 3.3V レベルへの昇圧変換に使用できます。

The AiP74LV1T00 is a single, level translating 2-input NAND gate

The AiP74LVC1G00 provides the single 2-input NAND function. Input can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC1G02 provides the single 2-input NOR function. Input can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC1G04 provides one inverting buffer. Input can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC1GU04 is a single unbuffered inverter. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G06 provides the inverting buffer. Input can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment. The output of the device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions.

The AiP74LVC1G07 provides the non-inverting buffer. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G08 provides one 2-input AND function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC1G10 provides a low-power, low-voltage single 3-input NAND gate.The inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.This device is fully specified for partial power-down applications using IOFF.The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

The AiP74LVC1G11 provides a single 3-input AND gate. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G14 provides the inverting buffer function with Schmitt-trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. Schmitt-trigger action at the input makes the circuit tolerant for slower input rise and fall time. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

The AiP74LVC1G16 provides a low-power, low-voltage single buffer. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G18 is a 1-of-2 non-inverting demultiplexer with a 3-state output. The device buffers the data on input pin A and passes it either to output 1Y or 2Y, depending on whether the state of the select input (pin S) is LOW or HIGH. Input can be driven from either 3.3 or 5V devices. These features allow the use of these devices in a mixed 3.3 and 5V environment.

The AiP74LVC1G19 is a 1-of-2 decoder/demultiplexer with a common output enable. This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement) when the enable (E(—)) input signal is LOW. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC1G27 provides one 3-input NOR function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC1G32 provides one 2-input OR function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

AiP74LV1T04は、シングルレベル変換反転バッファです。低しきい値入力は1.8Vをサポートします。入力ロジックはVCC=3.3Vで動作し、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5V耐性を備えています。入力ピンはレベルダウン変換（VCC=2.5Vで3.3Vから2.5V出力）を可能にする。出力レベルは電源電圧に応じて 1.8V、2.5V、3.3V、5.0V の CMOS レベルをサポートします。

The AiP74LVC1G34 provides a low-power, low-voltage single buffer. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

AiP74LV1T08は、シングルレベル変換機能付き2入力ANDゲートです。低しきい値入力は、VCC=3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（VCC=2.5Vで3.3Vから2.5Vへの出力）を可能にします。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0VのCMOSレベルをサポートします。広いVCC範囲により、コントローラやプロセッサに接続するための出力レベルを生成できます。

The AiP74LVC1G38 provides a 2-input NAND function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as translator in a mixed 3.3V and 5V environment.

AiP74LV1T32は、シングルレベル変換機能を持つ2入力ORゲートです。低しきい値入力は、VCC=3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（VCC=2.5Vで3.3Vから2.5Vへの出力）を可能にします。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0VのCMOSレベルをサポートします。

The AiP74LVC1G57 provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic functions AND, OR, NAND, NOR, XNOR, inverter and buffer. All inputs can be connected to VCC or GND. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. All inputs (A, B and C) are Schmitt trigger inputs. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.

AiP74LV1T34は、シングルレベル変換バッファです。低スレッショルド入力は、VCC=3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（VCC=2.5Vで3.3Vから2.5Vへの出力）を可能にします。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0VのCMOSレベルをサポートします。広いVCC範囲により、コントローラやプロセッサに接続するための出力レベルを生成できます。

The AiP74LVC1G58 provides configurable multiple functions.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment

AiP74LV1T86 は、単一のレベル変換 2 入力排他的 OR ゲートです。低しきい値入力は、VCC = 3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vのレベルアップで使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（3.3Vから2.5V出力）を可能にします。VCC=2.5V）。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0Vをサポートします。CMOSレベル

The AiP74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D) inputs, clock (CP) inputs, set (S(—)D) and reset (R(—)D) inputs, and complementary Q and Q(—) outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation.

AiP74LV1T87は、シングルレベル変換機能を持つ2入力排他的NORゲートです。低しきい値入力は、VCC=3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（VCC=2.5Vで3.3Vから2.5Vへの出力）を可能にします。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0VのCMOSレベルをサポートします。

The AiP74LVC1G79 provides a single positive-edge triggered D-type flip-flop.  Information on the data input is transferred to the Q-output on the LOW-to-HIGH transition of the clock pulse. The D-input must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

AiP74LV1T125 は、3 ステート出力を備えた単一のレベル変換バッファ/ライン ドライバです。

The AiP74LVC1G80 provides a single positive-edge triggered D-type flip-flop.  The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a  mixed 3.3V and 5V environment.

AiP74LV1T126 は、3 ステート出力を備えた単一のレベル変換バッファ/ライン ドライバです。低しきい値入力は、VCC = 3.3Vで1.8V入力ロジックをサポートし、1.8Vから3.3Vのレベルアップで使用できます。さらに、5Vトレラント入力ピンはレベルダウン変換（3.3Vから2.5V出力）を可能にします。VCC=2.5V）。出力レベルは電源電圧を基準とし、1.8V、2.5V、3.3V、5.0Vをサポートします。CMOSレベル

The AiP74LVC1G86 provides the 2-input EXCLUSIVE-OR function. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

AiP74LV4T125は、3ステート出力を備えたクワッド変換バッファ/ラインドライバです。入力は、VCC=3.3Vで1.8V入力ロジックに適合する低閾値回路を備えており、1.8Vから3.3Vへのレベルアップ変換に使用できます。さらに、5Vトレラント入力ピンは、VCC=2.5Vで3.3Vから2.5Vへのレベルダウン変換も可能にします。1.8Vから5.5Vまでの広いVCC範囲により、コントローラやプロセッサに接続する際に必要な出力レベルを生成できます。

The 74LVC1G97 is a configurable multiple function gate with Schmitt-trigger inputs.  The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G98 is a configurable multiple function gate with Schmitt-trigger inputs.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment

The AiP74LVC1G99 provides a low voltage, ultra-configurable, multiple function gate with 3-state  output. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a  mixed 3.3V and 5V environment.

The AiP74LVC1G123B is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output pulse width is controlled by three methods: 1. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). 2. Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input ( ) or the active HIGH-going edge input (B). By repeating this process, the output pulse period (Q = HIGH) can be made as long as desired.  3. An internal connection from  to the input gates makes it possible to trigger the circuit by a HIGH-going signal at input .

The AiP74LVC1G125 provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (OE(—)). A HIGH-level at pin OE(—) causes the output to assume a high-impedance OFF-state. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G126 provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (OE). A LOW-level at pin OE causes the output to assume a high-impedance OFF-state. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G132 provides a dual 2-input NAND gate with schmitt-trigger inputs.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G157 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The input can bedriven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G240 is a single line driver with a 3-state output. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G332 provides single 3-input OR gate. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G373 provides a D-type latch with 3-state output. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G374 provides a D-type flip-flop with 3-state output. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1G386 provides a 3-input EXCLUSIVE-OR function. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC2G00 provides a 2-input NAND gate function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V and 5V environment.

The AiP74LVC2G02 provides a 2-input NOR gate function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V and 5V environment.

The AiP74LVC2G04 provides the dual inverting buffer. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC2GU04 provides two unbuffered inverters. Each inverter is a single stage with unbuffered output. The inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC2G06 provides two inverting buffers. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

The AiP74LVC2G07 provides two non-inverting buffers. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC2G08 provides a 2-input AND gate function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of the AiP74LVC2G08 as a translator in a mixed 3.3V and 5V environment.

The AiP74LVC2G14 provides two inverting buffers with Schmitt-trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. Schmitt-trigger action at the inputs makes the circuit tolerant of slower input rise and fall time.

The AiP74LVC2G16 provides two buffers. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC2G17 provides two non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V and 5V environment.

The AiP74LVC2G32 provides a 2-input OR gate function. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down.

The AiP74LVC2G34 provides two buffers. Inputs can be driven from either 3.3V or 5V devices. These features allow the use of these devices in a mixed 3.3V and 5V environment.

The AiP74LVC2G38 provides dual 2-input NAND function.  Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as  translators in a mixed 3.3V and 5V environment.

The AiP74LVC2G74 is a single positive-edge triggered D-type flip-flop with individual data (D) inputs, clock (CP) inputs, set (S(—)D) and reset (R(—)D) inputs, and complementary Q and Q(—) outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D inputs must be stable, one set-up time prior to the LOW-to-HIGH clock transition for predictable operation.

The AiP74LVC2G79 provides dual positive-edge triggered D-type flip-flop. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC2G86 provides a dual 2-input EXCLUSIVE-OR gate. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

The AiP74LVC2G125 provides a dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (pin nOE(—)). A HIGH-level at pin nOE(—) causes the output to assume a high-impedance OFF-state.

The AiP74LVC2G126 is a dual non-inverting buffer/line driver with 3-state outputs. Each 3-state output is controlled by an output enable input (pin nOE). A LOW-level at pin nOE causes the output to assume a high-impedance OFF-state.  Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of the AiP74LVC2G126 as a translator in a mixed 3.3V and 5V environment.

The AiP74LVC1G132 provides a dual 2-input NAND gate with schmitt-trigger inputs.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC2G157 is a single 2-line to 1-line data selector multiplexer which select data from two data inputs (A and B) under control of two common data inputs(A/B and G).  The input can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as  translators in mixed 3.3V and 5V applications.

The AiP74LVC2G240 is a dual inverting buffer/line driver with 3-state outputs.  The input can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as  translators in mixed 3.3V and 5V environment.

The AiP74LVC2G241 is a dual non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. The input can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC3G04 provides three inverters. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3GU04 is a triple unbuffered inverter. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3G06 provides three inverters. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND  functions. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3G07 provides three non-inverting buffers. The output of this device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH  wired-AND functions. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3G14 provides three inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment. Schmitt trigger action at the inputs makes the circuit tolerant of slower input rise and fall time. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

The AiP74LVC3G16 provides three buffers. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3G17 provides three non-inverting buffers with Schmitt trigger input. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC3G34 provides three buffers. The inputs can be driven from either 3.3V or 5V devices. This feature allows the use of the AiP74LVC3G34 as a translator in a mixed 3.3V and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down.

The AiP74LV00 provides a quad 2-input NAND function.

The AiP74LVC00 provides four 2-input NAND gates. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LV04 provides six inverting buffers.

The AiP74LVC04 provides six inverting buffers. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC07 provides six non-inverting buffers. The outputs are open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LV08 provides a quad 2-input AND function.

The AiP74LVC08 provides four 2-input AND gates. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LV14 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC14 and AiP74HCT14. The AiP74LV14 provides six inverting buffers with Schmitt-trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals. The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.

The AiP74LVC14 provides six inverting buffers with Schmitt trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in mixed 3.3V and 5V applications.

The AiP74LVC17 provides six non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in mixed 3.3V and 5V applications.

The dual 4-input positive-AND gate is designed for 2V to 5.5V VCC operation.

The AiP74LV32 is a low-voltage CMOS device that is pin and function compatible with AiP74HC32 and AiP74HCT32. The AiP74LV32 provides a quad 2-input OR function.

The AiP74LVC32 provides four 2-input OR gates.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC74 is a dual edge triggered D-type flip-flop with individual data (nD) inputs, clock (nCP) inputs, set (nS(—)D) and (nR(—)D) inputs, and complementary nQ and nQ(—) outputs.The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the nQ output on the LOW-to-HIGH transition of the clock pulse. The nD inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition, for predictable operation.Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.

The AiP74LV125 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC125 and AiP74HCT125. The AiP74LV125 provides four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE—). A HIGH at nOE—causes the outputs to assume a high-impedance OFF-state

The AiP74LVC125 consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE(—)). A HIGH at nOE(—)causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs.

The AiP74LV126 is a low-voltage Si-gate CMOS device that is pin and function compatible with AiP74HC/HCT126. The AiP74LV126 consists of four non-inverting buffers/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high impedance OFF-state.

The AiP74LVC126 consists of four non-inverting buffers/line drivers with 3-state outputs, which are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high-impedance OFF-state.Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs.

The AiP74LVC132 provides four 2-input NAND gates with Schmitt trigger inputs. It is capable of transforming slowly-changing input signals into sharply defined, jitter-free output signals.The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V environment.

The AiP74LVC138 is a 3-to-8 line decoder/demultiplexer. It accepts three binary weighted address inputs (A0, A1 and A2) and, when enabled, provides eight mutually exclusive outputs (Y(—)0 to Y(—)7) that are LOW when selected.There are three enable inputs: two active LOW (E(—)1 and E(—)2) and one active HIGH (E3). Every output will be HIGH unless E(—)1 and E(—)2 are LOW and E3 is HIGH.This multiple enable function allows easy parallel expansion of the device to a 1-of-32 (5 lines to 32 lines) decoder with just four AiP74LVC138 devices and one inverter. The AiP74LVC138 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Unused enable inputs must be permanently tied to their appropriate active HIGH or LOW state.

The AiP74LVC139 is a dual 2-to-4 line decoder/demultiplexer.. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC157 is a quad 2-input multiplexer which select four bits of data from two sources under the control of a common select input (S). The four outputs present the selected data in the true (non-inverted) form. The enable input (E(—)) is active LOW. When pin E(—) is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all the other input conditions. Moving the data from two groups of registers to four common output buses is a common use of the AiP74LVC157. The state of the common data select input (S) determines the particular register from which the data comes. It can also be used as function generator.It is useful for implementing highly irregular logic by generating any 4 of the 16 different functions of two variables with one variable common.The device is the logic implementation of a 4-pole, 2-position switch, where the position of the switch is determined by the logic levels applied to pin S.Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LV165 is an 8-bit parallel-load or serial-in shift register with complementary serial outputs (Q7 and Q7 ) available from the last stage. Schmitt-trigger action at all inputs, makes the circuit tolerant for slower input rise and fall times.

The AiP74LVC240 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE（—） and 2OE（—）.A HIGH on nOE（—） causes the outputs to assume ahigh-impedance OFF-state.Inputs can be driven from either 3.3V or 5V devices. In 3-state operation, outputs can handle 5V.Thesefeatures allow the use of these devices as translators in a mixed 3.3V and 5V environment.

  The AiP74LVC244 is an octal non-inverting buffer/line driver with 3-state outputs.The 3-state outputs are controlled by the output enable inputs 1OE(—) and 2OE(—). A HIGH on nOE(—) causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise and fall times.Inputs can be driven from either 3.3 V or 5.0 V devices. In 3-state operation, outputs can handle 5V. These features allow the use of these devices as translators in a mixed 3.3 V and 5V environm.    

The AiP74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE—)and send/receive (DIR) for direction control. A HIGH on OE—causes the outputs to assume ahigh-impedance OFF-state.

The AiP74LVC245 is a 8-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features an output enable(OE(—)) input for easy cascading and a send/receive (DIR) input for direction control. OE(—) controls the outputs so that the buses are effectively isolated.Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications.

The AiP74LVCH245 is an 8-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The AiP74LVCH245 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC273 consists of eight edge-triggered, D-type flip-flops with individual Dn inputs and Qn outputs. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC373 consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC374 is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and3- state outputs for bus-oriented applications.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in amixed 3.3V and 5V environment.

The AiP74LVC377 has eight edge-triggered D-type flip-flops with individual inputs (D) and outputs (Q). The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LV541 is an 8-bit buffer/line driver with 3-state outputs. The device features two output enables(OE—1 and OE—2). A HIGH on OE—n causes the associated outputs to assume a high-impedance OFF-state.

The AiP74LVC541 is an octal non-inverting buffer/line driver with 5V tolerant inputs and outputs. The 3-state outputs are controlled by the output enable inputs OE(—)1 and OE(—)2.This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3V and 5V applications.

The AiP74LVC573 consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications. A Latch Enable (LE) input and an Output Enable ( ) input are common to all internal latches.When LE is HIGH, data at the Dn inputs enters the latches. In this condition, the latches are transparent, that is, a latch output changes each time its corresponding D-input changes. When LE is LOW, the latches store the information that was present at the D-inputs one set-up time preceding the HIGH-to-LOW transition of LE.When  is LOW, the contents of the eight latches are available at the outputs. When  is HIGH, the outputs go to the high impedance OFF-state. Operation of the  input does not affect the state of the latches.Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3V or 5V applications.The AiP74LVC573 is functionally identical to the AiP74LVC373, but has a different pin arrangement.

The AiP74LVC574 is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LV595 is an 8 stage serial shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. It is a low-voltage Si-gate CMOS device and is pin and functionally compatible with the AiP74HC595 and AiP74HCT595. Data is shifted on the positive-going transitions of the SHCP input. The data in the shift register is transferred to the storage register on a positive-going transition of the STCP input. If both clocks are connected together, the shift register will always be one clock pulse ahead of the storage register. The shift register has a serial input (DS) and a serial output (Q7S) for cascading the device. It is also provided with an asynchronous reset input MR— (active LOW) for all 8 shift register stages. The storage register has 8 parallel 3-state bus driver outputs. Data in the storage register appears at the output whenever the output enable input (OE—) is LOW.

The AiP74LVC4245 is an octal dual supply translating transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to interface between a 3V and 5V bus in a mixed 3V and 5V supply environment.The device features an output enable input (pin ) for easy cascading and a send/receive input (pin DIR) for direction control. Pin controls the outputs so that the buses are effectively isolated.In suspend mode, when VCC(A) is zero, there will be no current flow from one supply to the other supply. The A-outputs must be set 3-state and the voltage on the A-bus must be smaller than Vdiode (typical 0.7V).VCC(A)VCC(B), except in suspend mode.

The AiP74LVC/LVCH16244 are 16-bit non-inverting buffer/line drivers with 3-state bus compatible outputs. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC/LVCH16244 are 16-bit non-inverting buffer/line drivers with 3-state bus compatible outputs. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC/LVCH16245 are 16-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable (n ) inputs for easy cascading and two send/receive (nDIR) inputs for direction control. n controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications.The AiP74LVCH16245 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

The AiP74LVC/LVCH16245 are 16-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable (n ) inputs for easy cascading and two send/receive (nDIR) inputs for direction control. n controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications.The AiP74LVCH16245 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

The AiP74LVC/LVCH16373 are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (AiP74LVCH16373 only) for each latch and 3-state outputs for bus-oriented applications. One Latch Enable (LE) input and one Output Enable( ) are provided for each octal. Inputs can be driven from either 3.3V or 5V devices.When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications.The device consists of two sections of eight D-type transparent latches with 3-state true outputs. When LE is HIGH, data at the Dn inputs enter the latches. In this condition, the latches are transparent, that is, the latch outputs change each time its corresponding D-input changes. The latches store the information that was present at the D-inputs one set-up time (tsu) preceding the HIGH-to-LOW transition of LE. When  is LOW, the contents of the eight latches are available at the outputs. When  is HIGH, the outputs go to the high impedance OFF-state. Operation of the  input does not affect the state of the latches. Bus hold on the data inputs eliminates the need for external pull-up resistors to hold unused inputs.

The AiP74LVC/LVCH16373 are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (AiP74LVCH16373 only) for each latch and 3-state outputs for bus-oriented applications. One Latch Enable (LE) input and one Output Enable( ) are provided for each octal. Inputs can be driven from either 3.3V or 5V devices.When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications.The device consists of two sections of eight D-type transparent latches with 3-state true outputs. When LE is HIGH, data at the Dn inputs enter the latches. In this condition, the latches are transparent, that is, the latch outputs change each time its corresponding D-input changes. The latches store the information that was present at the D-inputs one set-up time (tsu) preceding the HIGH-to-LOW transition of LE. When  is LOW, the contents of the eight latches are available at the outputs. When  is HIGH, the outputs go to the high impedance OFF-state. Operation of the  input does not affect the state of the latches. Bus hold on the data inputs eliminates the need for external pull-up resistors to hold unused inputs.

The AiP74LVC/LVCH162373 are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (AiP74LVCH162373 only) for each latch and 3-state outputs for bus-oriented applications. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC/LVCH162373 are 16-bit D-type transparent latches featuring separate D-type inputs with bus hold (AiP74LVCH162373 only) for each latch and 3-state outputs for bus-oriented applications. The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74LVC1T45; AiP74LVCH1T45 are single bit, dual supply transceivers with 3-state outputs that enable bidirectional level translation. They feature two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2 V and 5.5 V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins A and DIR are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH1T45 holds unused or floating data inputs at a valid logic level.

The AiP74LVC1T45; AiP74LVCH1T45 are single bit, dual supply transceivers with 3-state outputs that enable bidirectional level translation. They feature two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2 V and 5.5 V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins A and DIR are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH1T45 holds unused or floating data inputs at a valid logic level.

The AiP74LVC2T45; AiP74LVCH2T45 are dual bit, dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two 2-bits input-output ports(nA and nB), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR allows transmission from nB to nA.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH2T45 holds unused or floating data inputs at a valid logic level.

The AiP74LVC2T45; AiP74LVCH2T45 are dual bit, dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two 2-bits input-output ports(nA and nB), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR allows transmission from nB to nA.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH2T45 holds unused or floating data inputs at a valid logic level.

The AiP74LVC2T45; AiP74LVCH2T45 are dual bit, dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two 2-bits input-output ports(nA and nB), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR allows transmission from nB to nA.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH2T45 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH4T245 are 4-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. The device can be used as two 2-bit transceivers or as a 4-bit transceiver . It features four 2-bit input-output ports (nAn and nBn), a direction control input (nDIR), a output enable input (n ) and dual supply pins (VCC(A) and VCC(B)).Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nAn, n and nDIR are referenced to VCC(A) and pins nBn are referenced to VCC(B). A HIGH on nDIR allows transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable input (n ) can be used to disable the outputs so the buses are effectively isolated.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both nAn port and nBn port are in the high-impedance OFF-state. Active bus hold circuitry in the AiP74LVCH4T245 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH4T774 is a 4-bit, dual supply transceiver that enables bidirectional level translation. It features eight 1-bit input-output ports (An and Bn), four direction control inputs (DIR1, DIR2, DIR3 and DIR4), an output enable input ( ) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V). Pins An,  and DIRn are referenced to VCC(A) and pins Bn are referenced to VCC(B). A HIGH on DIRn allows transmission from An to Bn and a LOW on DIRn allows transmission from Bn to An. The output enable input ( ) can be used to disable the outputs so the buses are effectively isolated.The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both An and Bn are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH4T774 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH4T774 is a 4-bit, dual supply transceiver that enables bidirectional level translation. It features eight 1-bit input-output ports (An and Bn), four direction control inputs (DIR1, DIR2, DIR3 and DIR4), an output enable input ( ) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V). Pins An,  and DIRn are referenced to VCC(A) and pins Bn are referenced to VCC(B). A HIGH on DIRn allows transmission from An to Bn and a LOW on DIRn allows transmission from Bn to An. The output enable input ( ) can be used to disable the outputs so the buses are effectively isolated.The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both An and Bn are in the high-impedance OFF-state.Active bus hold circuitry in the AiP74LVCH4T774 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH8T245 are 8-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two data input-output ports (pins An and Bn), a direction control input (DIR), an output enable input ( ) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins An,  and DIR are referenced to VCC(A) and pins Bn are referenced to VCC(B). A HIGH on DIR allows transmission from An to Bn and a LOW on DIR allows transmission from Bn to An. The output enable input ( ) can be used to disable the outputs so the buses are effectively isolated.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state. Active bus hold circuitry in the AiP74LVCH8T245 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH8T245 are 8-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two data input-output ports (pins An and Bn), a direction control input (DIR), an output enable input ( ) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins An,  and DIR are referenced to VCC(A) and pins Bn are referenced to VCC(B). A HIGH on DIR allows transmission from An to Bn and a LOW on DIR allows transmission from Bn to An. The output enable input ( ) can be used to disable the outputs so the buses are effectively isolated.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both A port and B port are in the high-impedance OFF-state. Active bus hold circuitry in the AiP74LVCH8T245 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH16T245 are 16-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation.The device can be used as two 8-bit transceivers or as a 16-bit transceiver.It has dual supplies (VCC(A) and VCC(B)) for voltage translation and four 8-bit input-output ports (nAn and nBn) each with its own output enable (n ) and send/receive (nDIR) input for direction control.Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nAn, n and nDIR are referenced to VCC(A) and pins nBn are referenced to VCC(B). A HIGH on nDIR allows transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable input (n ) can be used to disable the outputs so the buses are effectively isolated.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both nAn port and nBn port are in the high-impedance OFF-state. Active bus hold circuitry in the AiP74LVCH16T245 holds unused or floating data inputs at a valid logic level.

The AiP74LVC/LVCH16T245 are 16-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation.The device can be used as two 8-bit transceivers or as a 16-bit transceiver.It has dual supplies (VCC(A) and VCC(B)) for voltage translation and four 8-bit input-output ports (nAn and nBn) each with its own output enable (n ) and send/receive (nDIR) input for direction control.Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2V and 5.5V making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5.0V). Pins nAn, n and nDIR are referenced to VCC(A) and pins nBn are referenced to VCC(B). A HIGH on nDIR allows transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable input (n ) can be used to disable the outputs so the buses are effectively isolated.The devices are fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both nAn port and nBn port are in the high-impedance OFF-state. Active bus hold circuitry in the AiP74LVCH16T245 holds unused or floating data inputs at a valid logic level.

The AiP74LVCC3245 provides 8-bit noninverting bus transceiver contains two separate supply rails. The B port is designed to track VCCB, which accepts voltage from 3V to 5.5V, and the A port is designed to track VCCA, which operates at 2.3V to 3.6V. This allows for translation from a 3.3V to a 5V system environment and vice versa, from a 2.5V to 3.3V system environment and vice versa

The AiP74ALVC164245 is a high-performance, low-power, low-voltage, Si-gate CMOS device,superior to most advanced CMOS compatible TTL families.The AiP74ALVC164245 is a 16-bit (dual octal) dual supply translating transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to interface between a 3V and 5V bus in a mixed 3V and 5V supply environment.This device can be used as two 8-bit transceivers or one 16-bit transceiver.The direction control inputs (1DIR and 2DIR) determine the direction of the data flow.nDIR (active HIGH) enables data from nAn ports to nBn ports. nDIR (active LOW) enables data from nBn ports to nAn ports. The output enable inputs (1 and 2 ), when HIGH, disable both nAn and nBn ports by placing them in a high-impedance OFF-state. Pins nAn, n and nDIR are referenced to VCC(A) and pins nBn are referenced to VCC(B).In suspend mode, when one of the supply voltages is zero, there will be no current flow from the non-zero supply towards the zero supply. The nAn-outputs must be set 3-state and the voltage on the A-bus must be smaller than Vdiode (typical 0.7V). VCC(B)≥VCC(A) (except in suspend mode).

The AiP74ALVC/ALVCH162374 are 16-bit Edge-triggered D-type Flip-flop with 3-state outputs.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.

The AiP74ALVC/ALVCH162374 are 16-bit Edge-triggered D-type Flip-flop with 3-state outputs.The input can be driven from either 3.3V or 5V devices. This feature allows the use of this device in a mixed 3.3V and 5V environment.